QH11D系列精密剪板機性能特點：
●相比較傳統剪板機外形美觀，簡潔時尚
●剪切精度高
●后擋料采用齒條齒輪傳動（手動、電動）控制尺寸精準
●傳動采用電磁吸盤制動，電機與閉合式齒輪箱與軸轉動，結構緊湊；可單次、可連續
●不剪切時，電機不轉動，減少無為的消耗，節約能源
●適合薄板加工，APS、PP片板等非金屬材料的加工剪切.

Performance characteristics of QH11D series precision shearing machine:
Compared with traditional shearing machines, it has a beautiful appearance, simple and fashionable
● High cutting accuracy
The rear gear adopts rack and pinion transmission (manual, electric) to control the size accurately
The transmission adopts electromagnetic suction cup braking, and the motor and closed gearbox rotate with the shaft, with a compact structure; Can be done once or continuously
When not cutting, the motor does not rotate, reducing the consumption of inactivity and saving energy, making it a new generation of energy-saving products
Suitable for thin plate processing, cutting of non-metallic materials such as APS and PP sheets



如何選擇更適用的精密剪板機，我們要從多角度入手，機械設備在遷移前，應查明行駛路線上的橋梁、涵洞的上部凈空及道路、橋梁的承載能力。通過橋梁時，應采用低速檔慢行，在橋面上不得轉向或制動。承載能力不夠的橋梁，必須事先制定加固措施。 

機械設備必須安裝在平整、堅實的場地上，遇松軟的場地必須先夯實，并加墊基臺木和木板。在臺架上作業的鉆機，鉆機底盤與臺架必須可靠連接。 

機械設備必須安裝穩固、周正水平。回轉鉆機的回轉中心、沖擊（沖抓）鉆機鉆架天車滑輪槽緣的鉛垂線應對準樁孔位置，偏差不得大于設計允許值（10～15mm）。 

必須在機械設備的傳動部分（明齒輪、萬向輪、皮帶和加壓輪）的外部安裝牢固的防護欄桿或防護罩，加壓輪用的鋼絲繩必須加防護套。 

剪板機有一套電啟動系統，手動小型精密剪板機，那么，精密剪板機型號選擇，它是怎樣操作的呢，有什么樣的性能?接下來電動剪板機小編將進行詳細的介紹。 

剪板機的動力系統一般使用普通異步電機，精密剪板機，在剪板過程中不斷啟停，能耗大、效率低。針對這些情況，可以對剪板機進行自動化改造，提高工作效率和剪板精度，降低能耗.

How to choose a more suitable precision shearing machine, we need to start from multiple perspectives. Before relocating the mechanical equipment, we should identify the upper clearance of bridges and culverts on the driving route, as well as the bearing capacity of roads and bridges. When passing over bridges, low-speed gear should be used for slow driving, and turning or braking is not allowed on the bridge deck. Bridges with insufficient load-bearing capacity must be reinforced in advance. 
Mechanical equipment must be installed on a flat and solid ground. In case of soft ground, it must be compacted first and cushioned with base wood and wooden boards. The drilling rig operating on the platform must have a reliable connection between the drilling rig chassis and the platform. 
Mechanical equipment must be installed stably and horizontally. The rotation center of the rotary drilling rig and the vertical line of the pulley groove edge of the impact (grabbing) drilling rig drilling frame should be aligned with the position of the pile hole, and the deviation should not exceed the design allowable value (10-15mm). 
A sturdy protective railing or cover must be installed on the exterior of the transmission parts of the mechanical equipment (open gears, universal wheels, belts, and pressure wheels), and the steel wire rope used for the pressure wheel must be protected with a sleeve. 
The shearing machine has an electric starting system and a manual small precision shearing machine. So, what is the model selection of the precision shearing machine, how is it operated, and what are its performance? Next, the editor of the electric shearing machine will provide a detailed introduction. 
The power system of a shearing machine generally uses ordinary asynchronous motors. Precision shearing machines constantly start and stop during the shearing process, resulting in high energy consumption and low efficiency. In response to these situations, the shearing machine can be automated to improve work efficiency and shearing accuracy, and reduce energy consumption.